Keyence GL-R Series Bedienungsanleitung PDF herunterladen (Seite 9)

E GL-R-IM

Specifications

 Specifications

*1 When the option front protection cover is installed on the one of transmitter or receiver, the Operating

distance is shorten by 0.5 m. When the front covers are installed on both of the transmitter and

receiver, the Operating distance is shorten by 1.0 m.

*2 When the GL-R is used under surrounding air temperatures between 50 to 55°C, the Maximum load

current should not exceed 350 mA.

*3 For PFHd of each GL-R, contact your nearest KEYENCE office.

 Response time (OSSD)

 GL-RF

Units: ms

 GL-RH

Units: ms

 GL-RL

Units: ms

*1 If the interruption is present in the detection zone for less than 80 ms, the response time (OFF to

ON) will be 80 ms or more to ensure that the OSSD maintains the OFF state for more than 80 ms.

*2 "All blocked" means the situation where the GL-R operates in optical synchronization system and

the transmitter and receiver is not synchronized (top and bottom beam axes are both blocked). In

this situation, the response time is longer because the GL-R synchronizes the transmitter and

receiver first and then determines the clear or blocked.

Point

• When the GL-R units are connected in series, the response time is calculated

according to the following steps;

1. Sum up the response time of all unit.

2. Subtract the following time from the result of previous step.

 ON to OFF

One sub unit : 2 ms

Two sub unit : 4.2 ms

(When Optical synchronization system and Channel A or B)

One sub unit : 2.7 ms

Two sub unit : 5.7 ms

 OFF to ON

One sub unit : 42 ms

Two sub unit : 84 ms

When connecting the GL-R32H (32 beam axes), GL-R24H (24 beam axes), and GL-

R12L (12 beam axes) in series for one-line system, the response time of each unit is

7.9 ms, 7.0 ms, and 6.6 ms respectively, and the response time (ON to OFF) is 7.9 ms +

7.0 ms + 6.6 ms - 4.2 ms = 17.3 ms.

the response time (OFF to ON) is 50.6 ms + 49.3 ms + 48.7 ms - 84 ms = 64.6 ms.

• 2.0 m/s is the maximum object detection speed of the GL-R series.

Model GL-RF GL-RH GL-RL

Beam axis spacing/Lens diameter 10 mm/4 20 mm/5 40 mm/5

Detection capability 14 mm 25 mm 45 mm

Operating distance 0.2 to 10 m

0.2 to 15 m

Effective aperture angle Max. ±2.5° (When operating distance is 3 m (9.84 ft.) or more)

Light source Infrared LED (870 nm)

Response time

Optical synchronization (Channel 0) or Wire synchronization: 6.6 to 18.1 ms

Optical synchronization (Channel A or B): 6.9 to 27.4 ms

OSSD operation Turns on when no interruptions are present in the detection zone

Synchronization between the transmitter

and receiver

Optical synchronization or Wire synchronization

(Determined by wiring)

Light interference prevention function

Prevents mutual interference in up to two GL-R systems.

Optical synchronization: prevented by Channel A and B with setting switch

Wire synchronization: prevented automatically

Control output

(OSSD)

Output

2 transistor outputs.

(PNP or NPN is determined by the cable type)

Max. load current 500 mA

Residual voltage (during

ON)

Max. 2.5 V (with a cable length of 5 m (16.4 ft.))

OFF state voltage Max. 2.0 V (with a cable length of 5 m (16.4 ft.))

Leakage current Max. 200 A

Max. capacitive load 2.2 F

Load wiring resistance Max. 2.5 

Supplemental

output

(Non-safety-

related output)

AUX Transistor outputs. (Compatible with both PNP and NPN)

Load current: Max. 50 mA, Residual voltage: Max. 2.5 V

(with a cable length of 5 m (16.4 ft.))

Error output

Muting lamp output

Incandescent lamp (24 VDC, 1 to 5.5 W) or

LED lamp (load current :10 to 230 mA) can be connected

Input

EDM input

< with PNP cable >

ON-voltage: 10 to 30 V

OFF-voltage: Open or 0 to 3 V

Short-circuit current:

Approx. 2.5 mA

(Approx. 10 mA for EDM)

< with NPN cable >

ON-voltage: 0 to 3 V

OFF-voltage: Open or

10 V to Power voltage

Short-circuit current:

Approx. 2.5 mA

(Approx. 10 mA for EDM)

Wait input

Reset input

Muting input 1, 2

Override input

Power supply

Power voltage DC24 V ± 20% (Ripple P-P 10% or less, Class2)

Current consumption Transmitter: 37 to 81 mA, Receiver: 66 to 91 mA

Protection circuit

Reverse current protection, short-circuit protection for each output, surge protection for each output

Environmental

resistance

Enclosure rating IP65 / IP67 (IEC60529)

Overvoltage category

Ambient temperature -10 to +55°C (No freezing)

Storage ambient

temperature

-25 to +60°C (No freezing)

Relative humidity 15% to 85%RH (No condensation)

Storage relative humidity 15% to 95%RH

Ambient light White incandescent lamp: 3,000 lx or less, Sunlight: 20,000 lx or less

Vibration

10 to 55 Hz, 0.7 mm compound amplitude, 20 sweeps each in X, Y and Z directions

Shock

100 m/s

(Approx. 10 G) 16 ms pulse in X, Y and Z directions 1,000 times each axis

Material

Main unit case Aluminum

Upper case/Lower case Nylon (GF30%)

Front cover Polycarbonate, SUS304

Weight see "Weight" (page 10)

Approved

standard

EMC

EMS IEC61496-1, EN61496-1, UL61496-1

EMI EN55011 ClassA, FCC Part15B ClassA, ICES-003 ClassA

Safety

IEC61496-1, EN61496-1, UL61496-1 (Type 4 ESPE)

IEC61496-2, EN61496-2, UL61496-2 (Type 4 AOPD)

IEC61508, EN61508 (SIL3), IEC62061, EN62061 (SIL CL3)

EN ISO13849-1:2008 (Category 4, PL e)

UL508

UL1998

Parameter for

IEC61508

T1 (Proof test interval) 20 years

PFHd (average frequency

of a dangerous failure per

hour)

1.78×10

-9

to 5.14×10

-9

Hardware fault tolerance 1

Type of element Type B

Failure response time Within a response time

Safe state OSSDs are in OFF-state

Model

Response time (OSSD)

Wire synchronization, One-line or

Optical synchronization system (Channel 0)

Optical synchronization system

(Channel A or B)

ONOFF OFFON

All blocked



ONOFF OFFON

All blocked



GL-R23F 6.9 49.2 64.4 9.3 52.7 74.0

GL-R31F 7.8 50.5 67.9 10.7 54.8 79.5

GL-R39F 8.6 51.8 71.3 12.1 56.9 85.1

GL-R47F 9.5 53.1 74.8 13.5 59.0 90.7

GL-R55F 10.4 54.3 78.3 14.9 61.1 96.3

GL-R63F 11.2 55.6 81.7 16.3 63.2 101.8

GL-R71F 12.1 56.9 85.2 17.6 65.3 107.4

GL-R79F 13.0 58.2 88.6 19.0 67.4 113.0

GL-R87F 13.8 59.5 92.1 20.4 69.4 118.5

GL-R95F 14.7 60.8 95.5 21.8 71.5 124.1

GL-R103F 15.5 62.1 99.0 23.2 73.6 129.7

GL-R111F 16.4 63.4 102.4 24.6 75.7 135.2

GL-R119F 17.3 64.7 105.9 26.0 77.8 140.8

GL-R127F 18.1 66.0 109.4 27.4 79.9 146.4

Model

Response time (OSSD)

Wire synchronization, One-line or

Optical synchronization system (Channel 0)

Optical synchronization system

(Channel A or B)

ONOFF OFFON

All blocked



ONOFF OFFON

All blocked



GL-R08H 6.6 48.7 63.1 6.9 49.1 64.2

GL-R12H 6.6 48.7 63.1 7.4 49.9 66.3

GL-R16H 6.6 48.7 63.1 8.1 50.9 69.1

GL-R20H 6.6 48.7 63.1 8.8 52.0 71.9

GL-R24H 7.0 49.3 64.9 9.5 53.0 74.7

GL-R28H 7.4 50.0 66.6 10.2 54.0 77.5

GL-R32H 7.9 50.6 68.3 10.9 55.1 80.2

GL-R36H 8.3 51.3 70.0 11.6 56.1 83.0

GL-R40H 8.7 51.9 71.8 12.3 57.2 85.8

GL-R44H 9.2 52.6 73.5 12.9 58.2 88.6

GL-R48H 9.6 53.2 75.2 13.6 59.3 91.4

GL-R52H 10.0 53.9 77.0 14.3 60.3 94.2

GL-R56H 10.5 54.5 78.7 15.0 61.4 96.9

GL-R60H 10.9 55.2 80.4 15.7 62.4 99.7

GL-R64H 11.3 55.8 82.1 16.4 63.4 102.5

GL-R72H 12.2 57.1 85.6 17.8 65.5 108.1

GL-R80H 13.1 58.4 89.1 19.2 67.6 113.7

GL-R88H 13.9 59.7 92.5 20.6 69.7 119.2

GL-R96H 14.8 61.0 96.0 22.0 71.8 124.8

Model

Response time (OSSD)

Wire synchronization, One-line or

Optical synchronization system (Channel 0)

Optical synchronization system

(Channel A or B)

ONOFF OFFON

All blocked



ONOFF OFFON

All blocked



GL-R04L 6.6 48.7 63.1 6.9 49.1 64.2

GL-R06L 6.6 48.7 63.1 6.9 49.1 64.2

GL-R08L 6.6 48.7 63.1 6.9 49.1 64.2

GL-R10L 6.6 48.7 63.1 7.0 49.3 64.9

GL-R12L 6.6 48.7 63.1 7.4 49.9 66.3

GL-R14L 6.6 48.7 63.1 7.7 50.4 67.7

GL-R16L 6.6 48.7 63.1 8.1 50.9 69.1

GL-R18L 6.6 48.7 63.1 8.4 51.4 70.5

GL-R20L 6.6 48.7 63.1 8.8 52.0 71.9

GL-R22L 6.8 49.0 64.0 9.1 52.5 73.3

GL-R24L 7.0 49.3 64.9 9.5 53.0 74.7

GL-R26L 7.2 49.6 65.7 9.8 53.5 76.1

GL-R28L 7.4 50.0 66.6 10.2 54.0 77.5

GL-R30L 7.7 50.3 67.5 10.5 54.6 78.9

GL-R32L 7.9 50.6 68.3 10.9 55.1 80.2

1 2 3 4 5 6 7 8 9 10 11 12

Kommentare zu diesen Handbüchern

Keine Kommentare

Keyence GL-R Series Bedienungsanleitung Seite 9

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Beleuchtung Keyence GL-R Series