Keyence AP-V42A(P) Bedienungsanleitung PDF herunterladen

96M1373

3. Sensor Installation

4. Additional Amplifier installation

A single AP-V41A(P) sensor can be expanded

with the following number of slave units:

Up to 8 units AP-V42A/LV-22A/12SA

Up to 16 units FS-T2/M2/V12/V22/PS-T2/ES-M2

2. Part Names

Operating status indicators

Set button

Display

Manual adjustment button

Expansion

protective cover

Mode button

Dust cover

Expansion

connector

Sensor head connector

Output 1

Output 2

AP-V41A(P) AP-V42A(P)

5. Sensor Head Installation

Insert until it

clicks into place.

M3 screws

About

25 mm

About

25 mm

Connector

body

Connector

cover

Connector

lock

Orange

Brown

Blue

Gray

Pressure

connection

●

2 end units (included

with AP-V42A(P)

●

1 sensor head

connector

●

1 expansion seal

(included with

AP-V42A(P)

●

1 instruction

manual

●

1 mounting bracket

(included with AP-

V41A(P))

1) Cut the cable to an appropriate

length and strip away about 25

mm of the outermost insulation.

Note: It is not necessary to

remove insulation from the

core wires.

2) Insert the cables after aligning

them with the colors on the seal

on top of the connector body.

3) Press together the body and the

connector cover into which the

cables were inserted to make a

connection (use a pair of pliers

or similar tool to press them to-

gether).

4) Insert the sensor head connec-

tor into the hole on the front of

the amp unit.

To remove the connector, de-

press the connector lock and

pull it out.

●

Installation on a DIN track

1) Align the hook on the bottom

of the sensor to the DIN track

as shown below. Lower the sen-

sor in the direction indicated by

➁while pressing on the sensor

in the direction indicated by ➀.

2) When removing the sensor, lift

the sensor as shown in ➂ while

pushing on the sensor in the di-

rection indicated by ➀.

●

Installation using the included

mounting bracket (AP-

V41A(P)).

1) Remove the AP-V41A(P)’s

expansion protective cover.

2)Install the amps onto the DIN

track one at a time.

3) Insert the 2 hooks on each slave

unit into the groove on the AP-

V41A(P) until they click into

place.

4) Attach an end unit to each side

of the chain of amp units.

Sandwich the amps securely

between the end units and use

a Phillips head screwdriver to

tighten the screws on the top of

the end units (2 screws for each

unit).

* The same applies to the PNP type of the

respective models.

Wire-saving AI Digital

Pressure Sensor

AP-V41A(P)/V42A(P)

Instruction Manual

1. Safety Precautions

WARNING

●

Do not use this product in safety circuits such as those designed to

protect human workers.

●

This product does not employ an explosion-proof construction. Do not

use it in the presence of flammable gasses, liquids, or powders.

●

This is a direct current power supply type sensor. Application of an

alternating current may result in explosion or fire.

■ Accessories

1 2 3 4 5

Inhaltsverzeichnis

Seite 1 - Instruction Manual

196M13733. Sensor Installation4. Additional Amplifier installationA single AP-V41A(P) sensor can be expandedwith the following number of slave units:U

Seite 2 - <Output 2>

2 Variable hysteresis mode (F-2)Two detection points may be user-configured, and hysteresis for bothmay also be set.Control output 1: Turns ON when p

Seite 3 - . Sensor Configuration

3++After 4 sec of no key operation.Peak holdPress for 3 sec or more. Toggling the display Manual configuration Mode configurationIncrease the sett

Seite 4 - High-resolution

412. AI Tuning/Active Tuning (A-1)AI tuningActive 2 point tuningActive 1 point tuningSuctionSuctionVacuum burstP1 P2 T1Automatic configurationAutomati

Seite 5 - Display Cause Solution

517. Error Displays and Corrective Actions Error displays during normal operation• No difference in sensitivity (during 2 point tuning/AI tuning/acti

Verwandte Modelle: AP-V41A(P)

Kommentare zu diesen Handbüchern

Keine Kommentare

Keyence AP-V42A(P) Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Sensoren Keyence AP-V42A(P) herunter. KEYENCE AP-V42A(P) User Manual Benutzerhandbuch

Inhaltsverzeichnis

Verwandte Modelle: AP-V41A(P)

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sensoren Keyence AP-V42A(P)