Keyence CZ-V1 Bedienungsanleitung PDF herunterladen

RGB Digital Fiberoptic Sensors

CZ Series

Instruction Manual

SAFETY PRECAUTIONS

This manual describes the instructions, operating procedures and

precautions for using the CZ Series.

Before beginning operation, please read this manual carefully to get the

most from your CZ Series.

Keep this manual handy for future reference.

• The CZ Series is intended for the detection of target objects. Do

not use the CZ Series in a safety circuit to protect the human

body.

• The CZ Series does not have an explosion-proof structure. Do

not use it in a location where any flammable gases, liquid or

powder exist.

ACCESSORIES

WARNING

SPECIFICATIONS

Model

Light source

Response time

Indicators

Error indication

Calibration method

Tolerance value

adjustment

Differentiation mode

Timer function

Output mode

selection

External synchro-

nization input

External calibration

input

Registered color

selection

Control output

Protection circuit

Power supply

Current

consumption

Ambient light

Ambient

temperature

Relative humidity

Vibration

Shock

Housing material

Weight (including

2 m cable)

CZ-V1

Red LED, Green LED, Blue LED

300 µs/1 ms (switch selectable)

Output: Red LED, Calibration: Orange LED,

External synchronization input: Green LED,

Matching rate/received light intensity: LCD (Red/Green)

Excess light intensity, insufficient light intensity,

insufficient color difference

1-point/2-point calibration (switch selectable)

Numerical value setting on digital display

C mode/C + I mode/I mode (switch selectable)

Timer OFF/OFF-delay timer (40 ms) (switch selectable)

Match output: Turns on when target color

matches registered color.

Mismatch output: Turns on when target color is different

from registered color. (switch selectable)

Response speed: 500 µs max.

Input response time: 20 ms min.

8-bank selection (By external input or key operation),

Input response time: 20 ms min.

NPN open-collector: 40 VDC max. (100 mA max.),

Residual voltage: 1.0 V max.

Reverse-polarity protection (power supply),

overcurrent protection (output), surge protection (output)

12 to 24 VDC±10%, Ripple (P-P): 10% max.

75 mA max.

Incandescent lamp: 5,000 lux max.,

Sunlight: 10,000 lux max.

–10 to +55°C (14 to 131°F), No freezing

35 to 85%, No condensation

10 to 55 Hz, 1.5 mm double amplitude in X, Y, and Z

directions, 2 hours respectively

500 m/s

in X, Y, and Z directions, 3 times respectively

Polycarbonate

Approx. 115 g

1. When several units are connected, the acceptable ambient temperature varies

depending on the conditions given below. To connect several units, be sure to

mount them to a DIN rail (metallic plate). Ensure that the output current is 20

mA max.

• When 3 to 10 units are connected: -10 to +50°C (14 to 122°F)

• When 11 to 16 units are connected: -10 to +45°C (14 to 113°F)

Amplifier Fiber unit

Detection method

Model

Type

Detection range

Smallest spot diameter

Minimum bend radius

Enclosure rating

Ambient temperature

Relative humidity

Fiber length

Housing material

Weight

CZ-40

Long detecting distance

70±20 mm

6 mm dia.

R25 mm

Reflective

IP67

–40 to +70°C (–40 to 158°F), No freezing

35 to 85%, No condensation

2 m (free-cut)

Polyarylate

Approx. 27 g

CZ-41

Small beam spot

16±4 mm

1 mm dia.

R15 mm

Type

Model

Detection range

Smallest spot diameter

Minimum bend radius

Enclosure rating

Ambient temperature

Relative humidity

Fiber length

Housing material

Weight

Adjustable small beam spot

CZ-10

10 to 30 mm

0.9 to 3.5 mm dia.

Reflective

R25 mm

IP40

–40 to +70°C (–40 to 158°F), No freezing

35 to 85%, No condensation

Lens housing: Aluminum, Fiber case: Stainless steel

Adjustable small beam spot, sideview

CZ-11

3 to 15 mm

0.9 to 1.5 mm dia.

2 m (free-cut) 1 m (free-cut)

Approx. 5 g Approx. 13 g

Instruction manual (This manual): 1

Mounting bracket: 1 Plastic screw driver: 1

96M0744

1 2 3 4 5 6 7 8

Inhaltsverzeichnis

Seite 1 - CZ Series

1RGB Digital Fiberoptic SensorsCZ SeriesInstruction ManualSAFETY PRECAUTIONSThis manual describes the instructions, operating procedures andprecaution

Seite 2 - INPUT/OUTPUT CIRCUIT

2CONNECTING FIBER UNIT AND AMPLIFIER1. Tilt the quick-release lever.2. Push the single-core fiber to the transmitter side, and the multiple-core fiber

Seite 3 - SETTING EACH MODE

3PART NAMESCH1234MODESETN.ON.COFFDLY.OUTTIMSETHSPDFINE2-P1-PC+I CIDIP switches for mode settingHigh-speed/High-precision2-point/1-point calibrationDif

Seite 4 - Setting sensitivity

4OPERATING PROCEDURE FOR USING C OR C + I MODESetting sensitivityCalibration indicator 1-point calibration (Detection of one specified color)Place a

Seite 5 - LCD display indication

5OPERATING PROCEDURE FOR USING I MODESetting sensitivitySelect the sensitivity setting procedure according to the target condi-tions. To set sensitiv

Seite 6 - Selecting CH display

6OTHER FUNCTIONS (COMMON TO C, C + I, AND I MODES)Locking the sensitivity settingHold down the MODE button and press the UP button for 3 seconds.This

Seite 7 - ERROR INDICATIONS

7HINTS ON CORRECT USEMounting amplifier• If the amplifier cable is placed together with power lines or highvoltage lines in the same conduit, detectio

Seite 8 - DIMENSIONS

Kommentare zu diesen Handbüchern

Keine Kommentare

Keyence CZ-V1 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Sensoren Keyence CZ-V1 herunter. KEYENCE CZ-V1 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sensoren Keyence CZ-V1