Keyence LJ-V7000 Series Bedienungsanleitung PDF herunterladen (Seite 25)

25LJ-V7000_COM_RM_E

9 Functions

9.1 Function list

9.1.1 Operations for the DLL

These functions are processed normally even when the controller is in the system error state.

9.1.2 Establish/disconnect the communication path with the controller

These functions are processed normally even when the controller is in the system error state.

9.1.3 System control

Excluding LJV7IF_RetrunToFactorySetting, these functions are processed normally even when the controller

is in the system error state. LJV7IF_RetrunToFactorySetting may fail in the system error state (when a head is

not connected, etc.).

9.1.4 Measurement control

Processing for these functions fails when the controller is in the system error state.

Function name Overview

LJV7IF_Initialize Initializes the DLL

LJV7IF_Finalize Performs the termination processing for the DLL

LJV7IF_GetVersion Gets the DLL version

Function name Overview

LJV7IF_UsbOpen Establishes a USB connection

LJV7IF_EthernetOpen Establishes an Ethernet connection

LJV7IF_CommClose

Disconnects the connection (both USB and

Ethernet)

Function name Overview

LJV7IF_RebootController Reboots the controller

LJV7IF_RetrunToFactorySetting Returns the controller to the factory settings

LJV7IF_GetError Gets the controller system error information

LJV7IF_ClearError Clears the controller system error

Function name Overview

LJV7IF_Trigger Issues a trigger

LJV7IF_StartMeasure Starts measurements

LJV7IF_StopMeasure Stops measurements

LJV7IF_AutoZero Issues auto zero

LJV7IF_Timing Issues timing

LJV7IF_Reset Issues a reset

LJV7IF_ClearMemory Clears the internal memory

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 93 94

Keine Kommentare

Keyence LJ-V7000 Series Bedienungsanleitung Seite 25