Keyence LK-H2 Bedienungsanleitung PDF herunterladen (Seite 15)

2-3

2 Preparations before Operating

Ethernet connection

This section explains how to connect the controller and PC using an Ethernet connection. An

Ethernet connection allows connection of multiple controllers to a single PC. The

communication protocol is TCP/IP, and the connection format is Peer to Peer.

• Be sure not to use duplicated IP addresses for the controller(s) and PC.

• KEYENCE does not guarantee the operation of connections using other LAN protocols or routers.

• It is not possible to operate more than one controller simultaneously from a single PC.

• It is not possible to operate one controller simultaneously from multiple PCs.

Connection

Connect a commercially Ethernet cable (crossover cable, category 5) to the Ethernet

port on the controller.

Connect the other end of the cable to the LAN port on the PC.

 Connecting two or more controllers

You will need a hub that supports 100BASE-TX or 10BASE-T.

For the connection between the controller and hub, or between the PC and hub, use a

commercially available straight Ethernet cable.

NOTE

(

)

(

)

(

)

(

)

LK-

G5000

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 75 76

Keine Kommentare

Keyence LK-H2 Bedienungsanleitung Seite 15