Keyence PS-N10 Series Bedienungsanleitung PDF herunterladen (Seite 7)

Disable the Zero Shift Function

Press and hold the [PRESET] button to disable the zero shift function.

Output Switch

Either light-ON (L-on) mode or dark-ON (D-on) mode can be selected.

1 While the current value is displayed,

press the [MODE] button once.

2 Use to switch the output (L-on/D-on), then press the [MODE] button again.

The output change completes, and the display returns to the current value.

Initializing the Settings



Initialization Method

1 Press and hold the [SET] and

[PRESET] buttons simultaneously

for more than three seconds.

2 Use the to select "RST", then press the [MODE] button.

3 Use the to select "iNiT", then press the [MODE] button.

After initialization is complete, the display returns to the current value.

Initial Settings

Key Lock

The key lock function disables button operation to prevent unauthorized use.



Activating Key Lock

1 Press and hold the [MODE] button

and (or ) simultaneously for

three seconds or more.

2 The screen displays "Loc", disabling

key operation.



Deactivating Key Lock

1 Press and hold the [MODE] button

and (or ) simultaneously for

three seconds or more.

2 The screen displays "unL", enabling

key operation.

Error Displays and Corrective Actions

For errors other than the above, contact your nearest KEYENCE office.

Connecting to External Devices



Cable Type



M8 Connector Type



Socket Cable (Sold Separately)

For PS-N11Cx / N12Cx

The light intensity may not be set to ".0" when the reflective model sen-

sor head is first installed.

In this case, using the zero shift function to set the state with no target

present to ".0" will make it easier to see the difference in light intensities.

Setting Initial value

Power mode TURBO

Detection mode Std (Normal)

Setting value 50

Output switch L-on

Reference

SEL M

Press and hold for 3 seconds or more

SEL M

Error display Cause Solution

ErC

Overcurrent in the control out-

put.

• Check the load and return the cur-

rent within the rated range.

•

Check that the output wire is not

contacting any other wire or frame.

ErH

Sensor head cable is broken or

is not connected.

• Check that the sensor head is

connected.

• Check sensor head cable for dam-

age.

• Check the sensor head cable con-

nector for damage or loose con-

nections.

After checking, turn the power

OFF and ON.

ErE

Internal data write / load failed.

Turn the power OFF and ON. If the

data is not recovered, initialize the

settings.

Loc

Key lock function is enabled, or

the power mode was fixed to

MEGA mode using the selector

switch.

• Release the key lock.

• Check that the sensor amplifier

selector switch is set to MEGA

mode.

The DTM indicator

flashes.

Correction error in DATUM1 or

DATUM 2 mode.

See "PS-N10 Series UserÊs Manual"

for details.

PS-N11N / N12N PS-N11P / N12P

Input / output circuit diagram Input / output circuit diagram

*1 PS-N11N only *1 PS-N11P only

PS-N11CN / N12CN PS-N11CP / N12CP

Input / output circuit diagram Input / output circuit diagram

*1 PS-N11CN only *1 PS-N11CP only

10-30 VDC

3.3 VDC

Black

(Control output)

PLC, etc.

Short-circuit current

1 mA or less

Pink

Brown*

Blue*

Sensor main circuit

Overcurrent protection circuit

Load

Short-circuit current

2 mA or less

10-30 VDC

PLC, etc.

Pink

Blue*

Black

(Control output)

Brown*

Sensor main circuit

Overcurrent protection circuit

Load

10-30 VDC

3.3 VDC

④

(Control output)

PLC, etc.

②

①

③

Short-circuit current

1 mA or less

Sensor main circuit

Overcurrent protection circuit

Load

10-30 VDC

④

(Control output )

PLC, etc.

Short-circuit current

2 mA or less

②

①

③

Sensor main circuit

Overcurrent protection circuit

Load

M8 connector pin layout

OP-73864

(Cable length: 2 m)

OP-73865

(Cable length: 10 m)

Connected

pin No.

Pin and wire color table

1 Brown

White

Blue

Black

Wire color

1 2 3 4 5 6 7 8 9 10 11 12

Kommentare zu diesen Handbüchern

Keine Kommentare

Keyence PS-N10 Series Bedienungsanleitung Seite 7

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sensoren Keyence PS-N10 Series