Keyence LS-Navigator Bedienungsanleitung PDF herunterladen (Seite 55)

5-23

LS-Navigator-M-NO5-E

5-10 Setting the Measurement Conditions for the Program

Click on the [Calibration] tab in the

program setting area.

The [Calibration] window appears.

Set [Logic calibration] for area 1 and area

Note

These settings are effective when [Calibration

Settings ] for the controller is set to logic calibration

mode.

For more details, see the “Calibration Settings”

section in the “User’s Manual” for each controller.

Calibration

Select the area (area 1 or

area 2).

Enter the values for two points (target 1 and target

2) on the workpiece.

The values are displayed as follows:

The value for calibration span is automatically

calculated after the above values are entered.

The calibration span is display

ed as a ref

erence

value.

Note

When setting the calibration mode, enter values

that meet the following relationship:

T1-A < T2-A and T1-B < T2-B

Set the values so that the calibration span is

greater than 0.5 and smaller than 2.0.

Before calibration After calibration

FirstT1-A: Displayed

value for target 1

before calibration

T1-B: Displayed

value for target 1

after calibration

Second T2-A: Displayed

value for target 2

before calibration

T2-B: Displayed

value for target 2

after calibration

Copies the calibration settings

from area 1 or area 2 and pastes

them into area 1 or area 2.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 67 68

Kommentare zu diesen Handbüchern

Keine Kommentare

Keyence LS-Navigator Bedienungsanleitung Seite 55

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sensoren Keyence LS-Navigator