Keyence BL-N90 Series Bedienungsanleitung Seite 43
- Seite / 110
- Inhaltsverzeichnis
- FEHLERBEHEBUNG
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
3-1 Reading
3-3
3
Descriptions of Key Functions
Functions when Reading the Barcode
z Rereading prevention
The "rereading prevention function" ensures that an emitted laser does not accidentally
read the same barcode twice in a row.
If a single barcode is read multiple times within the specified rereading prevention time,
then the subsequent readings are ignored.
• Factory setting: 375 ms
Time can be set to 250 ms or greater in 125 ms units ( page 4-17).
• After a barcode had been read correctly, to read the same barcode again, either turn off
the laser light temporarily or move the barcode away from the reading window for about
one second to clear the reread prevention time.
z Limit read digits
This function limits the number of digits read when reading a barcode. Digits in the
barcode that exceed the limit are invalidated.
There are two types of settings ( page 4-18).
• Limit all : All types of registered codes are limited.
• Limit individual : An individual type of code is limited.
z Buzzer tone selection
The buzzer that signals various operations can be muted or set to seven different tones
( page 4-15).
Note
The buzzer used while configuring the settings cannot be changed.
- BL-N90 Series 1
- Introduction 2
- Laser Safety Precautions 3
- Handling the BL-N90 5
- Wireless Communication 6
- ■ Europe 7
- ■ North America 8
- Precautions on UL and CSA 9
- Maintenance 10
- Table of Contents 11
- Chapter 4 Program 12
- Overview 15
- Checking the Package Contents 16
- BL-N9R BL-N9V 17
- BL-N9UB 17
- Specialized stand OP-82191 18
- 1-2 Part Names 19
- Operation Check LED 20
- Initial Setup 21
- 2-1 Initial Setup 22
- Included parts 23
- BL-N9UB BL-N9V/N9R 24
- 1 Turn on the computer 25
- Installing the USB driver 26
- 1 Turn off the computer 27
- 4 Turn on your computer 28
- 1 Turn on your computer 29
- Conversion connector 30
- (D-sub 9-pin) 30
- 2-4 Charging the BL-N90 31
- Battery low alarm 32
- Continuous use capacity 32
- Charging time 32
- 2-5 Establishing a Connection 33
- Scanning a barcode 34
- Swapping out the BL-N90 34
- Initializing the BL-N90 35
- Readable range 36
- Read distance: 100 mm 36
- Trigger switch 36
- Operation check LED 36
- Precautions for reading 37
- X Incorrect Scan 37
- X Incorrect Scan 37
- Checking the Connected Pair 38
- Obstacle 39
- Descriptions of Key 41
- Functions 41
- 3-1 Reading 42
- Rereading prevention 43
- Limit read digits 43
- Buzzer tone selection 43
- Number of 44
- BL-N90 status 44
- Selecting the Reading Mode 45
- Detection 46
- Descriptions of Key Functions 48
- 3-3 Sending the Reading Data 49
- Inter-character Delay 50
- Localized settings 51
- No protocol 51
- 3-5 Charge Error Prevention 53
- 3-6 Sleep Mode 54
- Configuring the Program 56
- Start/End Program 57
- Initialization 57
- Settings for the Barcode Type 58
- EAN/UPC Detailed Settings 60
- Read only EAN add-on code 62
- GS1-128 62
- Send ]c1 symbol identifier 62
- Group separator settings 62
- Check digit inspection 63
- Send check digit 63
- Send application identifier 65
- Send symbol identifier 65
- 4-4 Setting the Reading Mode 67
- Auto-scan detection distance 68
- 4-5 Buzzer Settings 69
- 4-6 Decode Settings 70
- <375 ms> 500 ms 71
- Limit all settings 72
- Limit individual settings 72
- Block 1 settings 73
- Block 2 settings 73
- Block 3 settings 74
- Block 4 settings 74
- Block 5 settings 74
- Block 6 settings 74
- Block 7 settings 74
- Data Format 75
- <TAB prohibited> 76
- <ETX prohibited> 76
- <1 ms> 10 ms 76
- Keyboard/USB Settings 77
- RS-232C Settings 77
- Stop bit length 78
- Parity check 78
- Communication protocol 78
- 4-10 Other Settings 79
- 4-11 Decimal Program Code 80
- 4-12 Code Type List 81
- A-1 Specifications 84
- Communication unit 85
- A-2 Dimensions 86
- When using the pedestal 87
- When not using the pedestal 87
- Mounting 88
- Fix with double-sided tape 89
- Procedure 90
- A-4 Dedicated Stand 91
- Pedestal 93
- M3 screw 94
- Stand fixture 96
- Stand base 96
- Logo plate 96
- Flathead screw driver 96
- 7 Replace the logo plate 97
- A-5 Troubleshooting 98
- Problem Possible cause Remedy 99
- A-6 ASCII Code Table 100
- Barcode Settings 101
- Setting item Setting content 102
- Factory 102
- Operation Settings 104
- Communication Data Format 106
- Other Settings 107
- Connection Interface 107
- Appendices 108
- WARRANTIES AND DISCLAIMERS 109
Verwandte Produkte und Handbücher für Sensoren Keyence BL-N90 Series
Sensoren Keyence N-48/42 Bedienungsanleitung
(20 Seiten)
(20 Seiten)
Sensoren Keyence DV-90 Bedienungsanleitung
(262 Seiten)
(262 Seiten)
Sensoren Keyence N-400 Bedienungsanleitung
(150 Seiten)
(150 Seiten)
Sensoren Keyence N-410 Bedienungsanleitung
(160 Seiten)
(160 Seiten)
Sensoren Keyence KV Series Bedienungsanleitung
(26 Seiten)
(26 Seiten)
Sensoren Keyence KV Series Bedienungsanleitung
(240 Seiten)
(240 Seiten)
Sensoren Keyence KV-D20 Bedienungsanleitung
(72 Seiten)
(72 Seiten)
Sensoren Keyence MS-F07 Bedienungsanleitung
(2 Seiten)
(2 Seiten)
© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.897 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern