Keyence EX-V Series Bedienungsanleitung PDF herunterladen (Seite 46)

Chapter 3 Use of Common Functions

3.2.3 Monitor (analog voltage) output setting function [F]

This function is used to change the ratio of the analog voltage output value relative

to the displayed value, provided that the output voltage is between -5 and +5 V. By

performing scaling, you can change the output voltage value to the desired level. In

addition, you can select either of the following two output methods: one outputs

analog voltage according to the displayed value and the other outputs the input

value from the sensor head.

Reference: The initial state outputs the voltage equal to the displayed value.

Output scaling

The ratio of the analog voltage output relative to the displayed value can be

changed, provided that the output voltage is between -5 and +5 V. To perform

scaling, enter the desired monitor (analog voltage) output value respectively for two

desired correction points.

1. Press the

key for at least 2 seconds.

The sensor enters the common function selection mode.

2. Press the

key to make "F" flash.

3. Press the

or key to enter the monitor output setting mode.

4. Press the

key with "F-0" displayed.

The sensor enters the monitor output scaling setting state.

5.000

10.000

Point 1

Display value: 0.00

Monitor (analog voltage) output value: 0

Point 2

Display value: 10.000

Monitor (analog voltage) output value: 5

Before scaling

After scaling

Monitor (analog voltage)

output (V)

Monitor (analog voltage)

output (V)

Display

Setting

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 119 120

Lao 20 Nov 2024 | 23:59:11

Keyence EX-V Series Bedienungsanleitung Seite 46