Keyence EX-V Series Bedienungsanleitung PDF herunterladen (Seite 80)

Chapter 4 Use of Data Processing Functions

■ Sampling period

Specify the length of the sampling period after the hold-reset input.

• The sampling delay time and sampling period are specified with time length.

The unit of the setting display is "ms".

Example

1000.1 = 1000.1 ms

■ Flicker time

• Turns ON the internal trigger signals in a specified cycle. Set the flicker time to

repeat the measurement continuously in a specific cycle.

• The flicker time is specified with time length.

The unit of the setting display is "ms".

Note 1: The sampling delay and sampling period can be specified within the range

of 0.0 to 19999.9 ms.

Note 2: The flicker time can be specified within the range of 0.1 to 19999.9 ms.

Note 3: When "b-0" is selected as the measurement type, only "[-0" is displayed

to be set.

Setting function "["

1. Press the key for at least 2 seconds.

The sensor enters the common function selection mode.

2. Press the

key to make function "[" flash.

3. Press the

or key to select the function setting mode.

4. Press the

key to select the desired function.

Select one of settings "0" to "3" and follow the procedures according to the

selected function number.

Sampling period

Trigger point Starting point

The measured value is

displayed/output at this point.

(Time)

Sampling

delay time

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 119 120

Lao 20 Nov 2024 | 23:59:11

Keyence EX-V Series Bedienungsanleitung Seite 80