Keyence LS-5000 Bedienungsanleitung PDF herunterladen (Seite 97)

Chapter 8 RS-232C I/O

Example: Send the measured value from OUT No. 2 continuously.

Note 1: When the LS-5000 series receives the “N” (continuous output) command in

either peak hold, bottom hold, difference hold, sample hold or self-timing mode, the

LS-5000 series sends the measured value once every time the synchronous input

is turned on (the measured value is confirmed).

Note 2: When the LS-5000 series receives the “N” (continuous output) command in

either normal, auto peak, auto bottom or auto difference hold mode, the LS-5000

series continuously sends the measured value.

■ Data format

• Received Command: [M] [1] [CR]

• Transmitted data

In Normal mode

In Pitch mode

LS-5000 series

During

measurement

Sends the measured

value continuously

Stops the continuous

data transmission

Personal computer

Sends [N] [2] [CR]

Sends [O] [CR]

End

Receives data

continuously

During continuous

data transmission

First data Second data Third data 4th data 5th data 6th data 7th data 8th data 9th data 10th data

123 . 45670CR

(Displayed value: 123.45670)

–SP0.98765CR

(Displayed value:-0.98765)

First data Second data Third data 4th data 5th data 6th data 7th data 8th data 9th data 10th data

11th data 12th data 13th data 14th data 15th data 16th data 17th data 18th data 19th data 20th data

SP SP 1.23456 ,

SP SP 0.98765C

(Displayed value: Max: 1.23450, Min.: 0.98765)

1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 131 132

Keine Kommentare

Keyence LS-5000 Bedienungsanleitung Seite 97